Solid wood furniture is popular among a wide range of customers for its natural woody feel. The purchase of furniture is of course important, and the maintenance of furniture is not short. The quality of furniture maintenance is directly related to the life of furniture, how should solid wood furniture be maintained?
 
 
1. Pay attention to the clean and maintenance of the furniture exterior. Solid wood furniture is painted with paint, which is especially important for the maintenance and maintenance of the paint film. Once the paint film is damaged, it not only affects the appearance, but also further affects the internal structure of the product. Therefore, you should always insist on the cleanliness of the furniture. Use a pure cotton soft cloth to wipe off the dust on the surface every day. At intervals, use the wet cotton thread that wrings out the moisture to clean the dust at the corner of the corner of the furniture. Dry soft cotton cloth can be dried, or after drying, apply a thin layer of high-quality light wax, which is as soft as the rubbing leather. This not only maintains the wood furniture, but also adds it. The light. However, the use of light wax must be cautious, and it is impossible to use low-quality products containing chemical corrosion components.
 
 
2. Prevent the removal of stains with alcohol, gasoline or other chemical solvents. If the appearance of the furniture is stained, do not rub hard. Use warm tea to remove the stains quietly. After the water evaporates, apply a small amount of light wax to the original part, then gently rub it several times to form a maintenance film.
 
 
3. Prevent hard objects from being scratched. When cleaning, do not let the cleaning things touch the furniture. Always keep in mind, do not let the consolidated metal products or other sharp objects touch the furniture, and maintain the appearance without scratches.
 
 
4. Prevent a humid environment. In the summer, if the house is full of tides, it is advisable to use thin glue to separate the furniture from the ground contact, and let the wall of the furniture adhere to the open space of 0.5-1 cm from the wall.
 
 
5. Keep away from heat sources. In the winter, it is best to place the furniture in a place with a heat flow of about 1M, to prevent long-term high baking, so that the wood part is cracked, deformed and the paint film is partially transformed.
 
 
6. Prevent direct sunlight. Outdoor sunlight should be prevented from exposing the whole or part of the furniture to long-term exposure. It should be placed in a place where it can escape from the sun, or be exposed to direct sunlight. In this way, it does not affect the indoor lighting, but also makes the soft light add a geometric and warm romantic atmosphere to the living room, together with the maintenance of the interior furniture.
 
 
7, try to prevent the use of oily furniture cleaners, so that the appearance of the product whitening phenomenon, assuming that the product is stained with oil on the outside, the general detergent can be used.
 
 
8. In order to keep the product fresh and durable, please do not place overheated food and rough bowl on the table.